Specifications:
Touch screen: NO
Storage: 128KB
Camera: NO
Microphone: YES
Call: YES
OS: Android/iOS
Operation mode: Button
Processor: 6261 364mhz
Network: GSM /2G netwoek
Cellular Band:GSM 850/900/1800/1900MHz
SIM: Micro SIM card
GSM positional accuracy: 50-200m
Speed accuracty: 0.1m/s
Battery: 3.7V 400mAh Li battery(inclueded)
USB interface: USB2.0
Standby time: 2-3 days
Screen size: Approx.3*2.2cm
Dial plate size: Approx.5.3*3.3*1.3cm
Color: Black/Deep blue
Material: Silicone
Suitable for: Kids
Note: When installing the SIM card, use a supplied screwdriver to open the rear cover screw of the watch, and then install the SIM card into the card slot.
Product operating instructions：
I. Preparation Before Use
1. Check whether the device’s model is correct or not, whether the accessories are all received.
2. Prepare a SIM card that supports GSM network; for the network, please consult your local operator. (Please turn off the device before insert your SIM card)
Support network: 2G, band: 850/900/180/1900mhz
3. The SIM card for the device needs to open GPRS function and caller ID function.
II. Detailed Operation
1. Insert the SIM card, turn the device on, then there will be “E” -- 2G network logo. Or it will show “no SIM card”.
(If you can’t turn the device on, please charge it for half an hour and try it again)
2. Scan the QR code in the manual to get the APP. There are QR codes for the Android and the iOS mobile phones.
3. Registration: Scan the 15-bit registration code or manually enter the registration code; the device is not IMEI. If the tag of registration code is lost, you can text “pw,123456,ts#” to the device’s SIM card. Your phone will receive a message in terms of the registration code, that is ID. Then follow the operating steps to register.
(Note: Please select the correct country or region when you register.)
4. Log In: After finishing your registration, enter the correct account and password in the login window, click “log in”, enter the home page to achieve the operation of the device.
III. Common Questions.
1. It prompts that it’s unable to register.
A: There are two general situations:
a. The device’s number does not exist or the number has been registered, please contact us (the seller) about it at once.
B. The account has been registered, that is, you just need to change another account that can be registered.
2. The device is unable to charge or you can not turn it on.
A: The device has less than 100% power after it leaves the factory. During the long-term transport, it may lose lots of power for the environment is always changing, which causes that it is unable to turn on when you receive it. At this case, connect the data cable with a 5V adapter, charge the device for about ten minutes, then it will prompt it is charging.
3. APP is downloaded, but the device can not connect with the phone. The App fails to send any command, prompting that the device has not connected network yet. Or the App map does not update the current position and time of the watch, and it also fails to send the position.
A: Because the device’s connection is unsuccessful, which caused by the following three situations:
(1) Check whether the watch’s GSM signal is normal or not, whether there the “E” is.
(2) Check whether the mobile phone’s network signal is good or not.
(3) Check whether the device’s SIM card support 2G network; the device only supports 2G network.
4. The device fails to power off: it is required to take out the card and then long press the power button.
A: Because the device is inserted the SIM card, you can not long press the button to shut it down. This design is to prevent the child shut it down by himself or in case that bad guys are easily to shut it down. So After the SIM card inserted, you have to use APP to remotely shut it down.
5. the product can not be connected to WiFi, you need to install the SIM card, and then via the mobile phone APP positioning, some customers think that it can connect to WiFi directly.
A: Wifi is aimed at more precise positioning. And the watch can not be connected to wifi. Generally indoor GPS signal will not be quite good, wifi have a fixed physical address, so the indoor GPS signal is not that good, wif Positioning will be automatically searching for nearby wifi, improving positioning accuracy.
6. Some buyers installed a SIM card, but still cannot search the network, do not know SIM card compatibility.
This product supports network standard: 2G/GSM, 850/900/1800/1900mhz.
SIM card compatibility: Only support 2G flow, the watch cannot be used if have no 2G network. You can consult the network operator to check the network condition.(Australia and Singapore do not support 2G flow)
Features:
100% brand new and high quality
You can choose some activity areas for your kids on the APP maps, once your kids leave these areas, the APP will alarm to remind you automatically
The smart watch can connect your mobile phone, convenient for you to know the situations of your children
You can choose some activity areas for your kids on the APP maps, once your kids leave these areas, the APP will alarm to remind you automatically
Two-way communication function: you parents can dial the smart watch, and your kids can also make a phone call to parents(press “1” button for 3 seconds to dial the first reserved number, press “2” button for 3 seconds to dial the second reserved number)
SOS-one key calling for help: press the “SOS” button for 3 seconds, the smart watch will auto dial the 3 reserved SOS phone number circularly, help parents to know the location and situations of their kids in time, prevent accidents occur
Package:
1x Smart watch
1x Screwdriver
1x USB cable
1x User manual
Αρχική Σελίδα
Το καλάθι σας είναι άδειο.
